Blackbird MkII - Portable Mini ITX PC Case
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A 100% 3D-printed 7.23L Mini ITX case, remixed to add handle, psu mount, rigidity and a power button.
- Ocena
- 0 / 5
- Polubienia
- 35
- Pobrania
- 116
- Wydruki
- 0
- Wyświetlenia
- 2985
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution — Noncommercial
Assembly is very similar to the original model, and can be found on the original forum post: https://smallformfactor.net/forum/threads/b-l-a-c-k-b-i-r-d.11306/#post-183600
You can opt to put the front panel piece with the button hole on top or bottom.
The recommended power supply is the HD Plex, 400W: https://hdplex.com/hdplex-400w-hi-fi-dc-atx-power-supply-16v-24v-wide-range-voltage-input.html
The power connector hole on the rear panel is intended to fit the HD Plex.
Additional Notes:
Now that the power supply is fully mounted, I've noticed there's not much clearance with the PSU and GPU. No immediate plans to address that, but maybe in the future.
I've also included a “WIP” file, called “Blackbird_mkII”, which are variations of the parts using Prusa Slicer modifiers. For example, I have a set of front panel parts that are quite rigid. Good for rigidity, but I didn't like the aesthetic as much.