Blackbird MkII - Portable Mini ITX PC Case
We calculate the final price from your selected file. You review and accept it before payment.
Preliminary estimate for PETG
€0.29 – €0.36 net (excluding VAT)
For file: blackbird-mkII_power-button_0.2mm_PETG_MK3S_26m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €0.32 excluding VAT (range midpoint).
- Weight reported by the author
- 2 g
- Print time reported by the author
- 25.8 min
- Source material
- PET
- Estimate material
- PETG
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
A 100% 3D-printed 7.23L Mini ITX case, remixed to add handle, psu mount, rigidity and a power button.
- Rating
- 0 / 5
- Likes
- 36
- Downloads
- 116
- Makes
- 0
- Views
- 2,995
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Computers
- License
- Creative Commons — Attribution — Noncommercial
Assembly is very similar to the original model, and can be found on the original forum post: https://smallformfactor.net/forum/threads/b-l-a-c-k-b-i-r-d.11306/#post-183600
You can opt to put the front panel piece with the button hole on top or bottom.
The recommended power supply is the HD Plex, 400W: https://hdplex.com/hdplex-400w-hi-fi-dc-atx-power-supply-16v-24v-wide-range-voltage-input.html
The power connector hole on the rear panel is intended to fit the HD Plex.
Additional Notes:
Now that the power supply is fully mounted, I've noticed there's not much clearance with the PSU and GPU. No immediate plans to address that, but maybe in the future.
I've also included a “WIP” file, called “Blackbird_mkII”, which are variations of the parts using Prusa Slicer modifiers. For example, I have a set of front panel parts that are quite rigid. Good for rigidity, but I didn't like the aesthetic as much.