Needle File Handles | File Handle Replacement
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Needle files come with weak handles! These are thicker and tighter tolerances with better grip.
- Ocena
- 5 / 5
- Polubienia
- 12
- Pobrania
- 135
- Wydruki
- 2
- Wyświetlenia
- 642
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution
There are 3 different versions of these files handles with 3 different inside diameters (they are labeled 1-3 on the end of the handle). The needle files I made these for had a shaft outside diameter of 0.1135''.
1 = Very Tight - (honestly this is the one I like… even though they take a while to get on with some twisting involved)
2 = Tight - (this was likely the factory fit)
3 = Loose - (too loose for my application, but I figured I'd add another version for slightly larger shafts…. note you can always scale these up and down to fit your needs!)
I printed mine with no brim and PLA+… 35% fill but this was probable not needed.
Cheers,
Red Beard Ops