Needle File Handles | File Handle Replacement
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Needle files come with weak handles! These are thicker and tighter tolerances with better grip.
- Rating
- 5 / 5
- Likes
- 12
- Downloads
- 135
- Makes
- 2
- Views
- 642
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution
There are 3 different versions of these files handles with 3 different inside diameters (they are labeled 1-3 on the end of the handle). The needle files I made these for had a shaft outside diameter of 0.1135''.
1 = Very Tight - (honestly this is the one I like… even though they take a while to get on with some twisting involved)
2 = Tight - (this was likely the factory fit)
3 = Loose - (too loose for my application, but I figured I'd add another version for slightly larger shafts…. note you can always scale these up and down to fit your needs!)
I printed mine with no brim and PLA+… 35% fill but this was probable not needed.
Cheers,
Red Beard Ops