Qube 500 - Tissues and Lube Holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
On those nights you are running a stringy print and don't want to get filament all over your work area or bed plate.
- Ocena
- 0 / 5
- Polubienia
- 9
- Pobrania
- 20
- Wydruki
- 0
- Wyświetlenia
- 491
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution
We’ve all been there. You’re browsing Printables and your 0.2 nozzle swaps to 0.8. Your TPU95A now has the tensile strength of PC. Your VOCs are about to seep out of your enclosure. All you can think about is bed adhesion. Your extruder is moving in the Z axis in awe of all those holes and options. This isn't your first layer, but you have never seen something as sexy as the Qube 500... and now you have PETG strings all over your bed plate.
Fear not friends! With this handy 3D model, you will have everything for your PEI and no IPA required (unless that’s your thing). Scrape off that residue, smack that benchy, and go to town with those dirty .step files.