1 / 5
TPU gasket for X1C/P1S/P1P top plate and X3D-v3 AMS Riser | Bambu Lab X1/P1 AMS Stand — zdjęcie 1
1 / 5

TPU gasket for X1C/P1S/P1P top plate and X3D-v3 AMS Riser | Bambu Lab X1/P1 AMS Stand

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

A simple 1mm thick TPU gasket that prints on one plate in 4 pieces that perfectly fits the X3D-V3 AMS riser.

Ocena
5 / 5
Polubienia
78
Pobrania
462
Wydruki
7
Wyświetlenia
4067
Oceny
5

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

While I love the X3D AMS stand concept, I wasn't happy with the fitment of the glass plate when the riser was installed. I cadded up a simple TPU gasket that fits the AMS Riser perfectly and also has cutouts for the glass plate handle screws.

Print in TPU and fit with glue to AMS Riser. I used superglue.

I purposefully did not include a print file as TPU is temperamental and you should make your own judgment. I printed in Overture standard TPU at 240C, 60mm/s with a CHT style nozzle hardened steel nozzle on a smooth PEI plate. Do not print on the bambu high temp plate without glue or it will likely get destroyed when you try to get the TPU off.
 

Tagi