Liczymy pasujące modele…
I designed v3 from scratch based on the v2 version. It now has more strength and more place for honeycomb / hex add-ons. I have added: Honeycomb / Hex Ledstrip holder Honeycomb / Hex Build plate holder Honeycomb / Hex Top glass holder I…
Hexified version of the Bambu Lab AMS Riser, with option to raise the glass as shelf to let heat out. I get a lot of requests and I don't mind following up on them as it makes these projects more interesting, although it takes a lot of…
Check my FB group if you need more info after reading below. Again a riser but this time one which is in line with the outer lines of the machine. I have tested it with the X1C and the P1S and glass fits perfect. You will need 4 top…
While I love the X3D AMS stand concept, I wasn't happy with the fitment of the glass plate when the riser was installed. I cadded up a simple TPU gasket that fits the AMS Riser perfectly and also has cutouts for the glass plate handle…
I uploaded STEP files so if you want to tinker with it, you don't have to mess with a STL. Print these in the orientation as they would sit on the top of your Printer All of the original connectors and remixes are compatible with this new…
It is not really a remix but I still want to mention the (HSW) Honeycomb Storage Wall creator for his great work on designing this. I have added it to my design to be able to use the sides of the printer as storage wall :-) So now we have…
Remix for use with the Honeycomb Storage Wall
* Print the gcode file. * STL file included for reference. This temperature tower is fixed to work with the Flux Delta 3D printer. Each numbered section was printed at the temperature displayed on the side. This gcode is rendered…
Check my FB group if you need more info after reading below. Again a riser but this time one which is in line with the outer lines of the machine. I have tested it with the X1C and the P1S and glass fits perfect. You will need 4 top…
Modified it to fit the Honeycomb Hex AMS Riser I get a lot of requests and I don't mind following up on them as it makes these projects more interesting, although it takes a lot of time I really don't mind spending my time but I would…
I introduce to you all the UBBO or Under Bambu Box It is designed to be placed underneath your Bambu X1/P1 printer to store parts, tools and buildplates. I have added 3mf files for easy printing, adjust the settings to your own needs.
Build plate holder/storage for the X3D Final AMS Riser with drawers
Cob Light Add-On I get a lot of requests and I don't mind following up on them as it makes these projects more interesting, although it takes a lot of time I really don't mind spending my time but I would appreciate it if you join the…
This version works for all AMS risers or just the glass on top without riser. https://www.amazon.nl/dp/B0B1J85JC3?psc=1&ref=ppx_yo2ov_dt_b_product_details https://www.amazon.nl/dp/B09F6WHYQP?psc=1&ref=ppx_yo2ov_dt_b_product_details…
The Minisforum ITX boards support an unusual hole placing for the cooler mounts, 52mm on the edges. The model by NAnglo uses a slighty wider spacing, therefore I needed to adapt it a little bit. Print with temperature resistant and robust…
Holder for glue, cutter and scraper on the hexagons X3D-v3 Riser | Bambu Lab X1/P1 AMS Stand The distance between the connecting hexagons is the same as the connector for the front and rear part. so this part can be added instead. to save…
On request and part of the FlexBox system the 2A-BOX fits 2 AMS units. I was not able to test it as I only have one AMS. Feel free to download and test and give your comments on what needs to be changed.
When I was looking for an AMS riser I wanted a specific style, but I also wanted one with bevelled inside edges to allow me to add a COB LED strip that I could plug into the 5V USB plug of my P1S. I could not find anything that had the…
For now the front and the back can be printed and the four feet. The sides are still under construction.
I have made a set for all sides of the Ender 5 Plus. Feel free to tip me to keep up designing stuff for you guys/girls :-) Print Settings Printer Brand: Creality Printer: Ender 5 Rafts: No Supports: No Infill: 20% is enough but more…
This will convert the footprint of the drawer to fit on the AMS Riser v3 https://www.printables.com/model/465919-put-on-the-printer-bambu-ams-drawer-stand
I get a lot of requests and I don't mind following up on them as it makes these projects more interesting, although it takes a lot of time I really don't mind spending my time but I would appreciate it if you join the club as club members…
This is a pen holder that uses the same hex attachment as the locks for the AMS riser. It can be attached to the sides or back of the AMS riser and is large enough to fit multiple pens, pencils, trim tools, utility blades, etc.
If you like you can join my Bambu3D4All FB page https://www.facebook.com/groups/bambu3d4all/
The included mod-fs-cover-m10 in the Vertex published files is a course thread M10 connector. which is odd since the rear PTFE connector is fine threads.
I made an inlay which can be put into a drawer to store tools. Check my Facebook group https://www.facebook.com/groups/bambu3d4all for more info on the drawer and UBBO
This model made for heat set inserts like in Voron Sourcing guides - M3x5x4 (https://aliexpress.ru/item/4000232858343.html or the same from another supplier) and M2x3x3 heat set insert for FS sensor screw As body cover part I used like in…
Modified version to add my LED add-ons as part of the design
Nice spool holder to attach to the back of the AMS riser It could be that it needs extra work, did not print it yet.
Customized version of http://www.thingiverse.com/thing:713300 Created with Customizer! http://www.thingiverse.com/apps/customizer/run?thing_id=713300 Instructions Using the following options: screw_hole_diameter = 55 supportless_friendly…
This is my Y axis conversion for the Simax3D Iron M1 printer; I did this to compliment my X axis Linear rail conversion. You will need the following parts: 2 x MGN12H 300mm Linear Rails 10 x 2020 M3 drop in nuts or T nuts. 10 x M3x10 ~ 12…
These tracks are designed to fit the inside parameter of the X3D-V3 AMS Riser and hold 10mm COB LEDs at 70 degrees from horizontal (20 degrees from vertical). I cut the lengths in quarters to allow them to print more easily without the…
This holder is designed to hold the AMS Disconnect Tool and attach it to the AMS riser on the sides or the front. I printed the one shown out of eSun White PETG using generic settings on my X1C.
I found the original holder from X3D allowed for the glass to slide from side to side and rattled during prints. With the Bambu Lab X1s and P1s violent movements, the glass can potentially fall off the original holder Therefore, I did the…
NOTE : Original STL file is only on Printables.com This model is ONLY to be used for a guide for your other 3D projects. Modelled of highest accuracy, deviation in measurements may occur with YOUR actual CPU.
This is an adaptation of the HSW side panel made by yoavik (on makerworld) to hang from the X3D Riser (v3). Included are print profiles for panels that can go on either side of X1 or P1 Bambu printers. You will also need to print the…
Created here a Tool holder for the X3D-v3 AMS Riser. Mounting is tuff but there is no wobbling or anything else.
The supports might not come off very cleanly, but I could just jam it in without additional processing. I wanted to include some filleting between the holder and the interface but I'm not a Fusion 360 person, so…
Hello, I just found the UBBO drawer's knob incredibly lacking. It was hard to grasp and ended up bending back my finger nail so I updated it with a larger knob to grasp on to.
I couldn't find any spool ring / adapter that properly fit the COEX3D “chipboard” spools, so I modified the parent model. I'm pretty sure that this will fit the stock AMS, but I do run HYDRA now so I can't be sure. I printed mine from…
This allows the use of the hex pattern on the X3D-V3 AMS Riser to be used the same as a peg board setup.
I modeled the steel insert of: https://www.amazon.com/dp/B01MZWRFBZ So I could import as a negative object and hollow out a chalice. You can use this for any holder that can use the insert. I created circles, raised them to the correct…
Custom tool holder for X3D v3 Hex AMS Riser - See the complete details below.
This is the culmination of projects while I've been printing parts to build a Voron. I decided it was time to convert the X axis to a linear rail. I combined this with my shroud design which will hold any E3D V6 compatible hotend. The X…
Quick and dirty modifications were made to the original STL mesh. As a result, the mesh geometry isn't that pretty, but it slices just fine.
Based on models by kobu83 and rostap - added pegs to mount the tools to the rear of my riser Category: 3D Printer Accessories
This model is designed to fit in the hex pattern of the X3D-V3 AMS Riser and allow the routing of wires along the sides/back of the riser. You could use this for other situations to tie off to as well.
This is designed to hold a smaller-diameter flashlight and attach it to the sides or back of the AMS riser.
I downloaded the X3D riser but needed a way to store some of my tools so here we are, I created tool holders for a flashlight, Digital Calipers, Scraper, Torch, Glue Stick, and model scraper.
I designed this E3D mount for the Simax3D IronM1. The stock hotend works fine, but it's not all metal, and it's really loud. My initial design, was simpler, and worked well; until I started printing ABS. The air flow from the heatsink…
It is designed for cubicles passthru from desk to desk or for a single desk thru a 54mm hole in the desk.
Simple spool size reducer to fit in GTMax3D spools in place where a tighter hole is needed (for example Bambu A1 AMS). Will with a tight fit adapt a standard GTMax3D spool from 72mm to 55mm. Printer Settings: 0.4mm Nozzle 0.28mm Layer…
I designed this controller mount for the LED controller that goes with the LED lights I added to my AMS riser . You could also purchase the LED controller and dimming remote combo if you want to be able to adjust the brightness of the…
This is a, possibly, less janky way to hold up to 5 build plates inside of your X3D AMS riser. The rack hangs from the riser top inner lip and is held in place by pressure from the AMS. V2 : added opening in the back center so that the…
This is a work in progress. It is a part to provide some extra strength to this fairly fragile design, in addition to making the belts serviceable. It retains the socket head cap screw as the Y end stop. I designed this after my Y axis…
VERTEX3D MMU2S+ Idler body with M3 heat set inserts and clean look side walls. Fasteners: heat set inserts M3x5x4 - 2pcs
This 3D printable filament spool (plan version) is specially designed for use with FLEXX3D filament refills. It allows users to print their own durable and reusable spool, making it easy to use refill packs and reduce overall filament…
1/10 Log bunk for 4X3D Tatra Force. Will fit both 4x4 and 6x6 version. 6x6 can have a total of ten bunks compared to the six of the 4x4 although I feel like having six looks best on both versions. The log bunks and cab protection are…
Filament box with dryer for 1,75mm filament rolls
Simple holder for Dual Flex3Drive for Ender 5. I was told Ender 3 uses same carriage so this might work for Ender 3 too but I have not tested, if you do test please comment. Printed in PETG but any material should work (stiffer the…
https://www.swiatdruku3d.pl/pirx-3d-nowa-drukarka-prosto-z-krakowa/ https://3dprint.com/49318/pirx-open-source-3d-printer/ https://github.com/Pirx3D/pirx/
This is a simple adaptor piece to fit the Flex3drive G5. It suits the Seckit SG-GO, but will likely also fit any machine with a Bondtech BMG and E3D V6 combo. M2.5mm brass threaded inserts need to be melted into the three mounting holes…
Disclaimer: I am in no way affiliated with Flex3Drive Ltd. or Mutely3D This is a free public domain model. No warranties, no guarantees, the usual stuff. The Flex3Drive for Ultimaker Oringinal https://flex3drive.com/flex3drive/f3d-umo/…
This pack contains my customized Flex3D mount for Railcore II. It contains: -G5 base with integrated mounting bracket Allows lightening up the gantry, lower the filament path to an absolute minimum, and gain over 10mm in Z travel. Also…
Printer case light. Instructions You will need 2x 5W led strips in aluminium profile ( http://goo.gl/FgBv8T ). Modified to remove touch/brightness control chip (see photo) and micro usb connectors. Removing micro usb is optional - holders…
X-Carriage (for Wanhao Duplicator I3, Malyan M150 and similar I3 clones) that can carry dual flex3drive extruder drive. source "files" (onshape) I'm using this flex3drive dual driver with 2 hexagons (one 1.75mm other 3.00mm) and am now…
This model replaces two parts on the original spool holder: the 30mm roller and the end-cap. The benefit is that filament spools with larger center openings like Hatchbox (54mm) won't flop around as much. Instructions: loosen the two M4…
My personal filament profile for Flexx3d PLA
Custom made mount plate to fit the stock hot-end in the twotrees Sapphire-S 3D printer and allow a Flex3Drive extruder to connect to it. The cut-out lip is needed to accommodate this hot-end mount Print Settings Printer: E3D BigBox Rafts:…
Piezo disk assembly for the flex3drive module for modular X-carriage . Intended to be used with Precision Piezo electronics and disk. print secure the piezo disk in the flat ring (20mm piezo disk holder.stl) flat ring goes directly under…
As promised back when I threw together The Scorpion ( http://www.thingiverse.com/thing:1686696 ) I have come up with a full-featured carriage (and extras) package for the flex3drive dual (…
practicing skills making by designing a COEX3D card
This is a custom version of the Flex3Drive Lite ( https://flex3drive.com/ ) It has been modified to accommodate my modular latching system and a PTFE filament feed line. The hardware kit is available from the flex drive website. NOTE:…
The Minisforum ITX boards support an unusual hole placing for the cooler mounts, 52mm on the edges. The model by NAnglo uses a slighty wider spacing, therefore I needed to adapt it a little bit. Print with temperature resistant and robust…
This 3D printable filament spool (plan version) is specially designed for use with FLEXX3D filament refills. It allows users to print their own durable and reusable spool, making it easy to use refill packs and reduce overall filament…
Nice lamp for car enthusiasts. A .3mf file as well as .STL files are included in the download. Print it with PLA, PETG or ABS, I personally prefer PETG. You are allowed to sell the printed version commercially. Ledstrip ESP32 Wire…
A nice Brake Disc Dekstop lamp. Led Lights I used from Amazon You can set the infill higher to have less diffusing on the stand. If you want to sell the printed version, it will soon be added to my lifetime license on BuyMeACoffee.com
rev2 has just been released with better connections between the parts and more space for the glass. This is the final version, tweaks and flaws will be corrected (if found) but will not make any new risers. This version also has the Cob…
X3D G-BOX and the A-BOX are the first part of the stackable FLEXBOX series for the Bambu Labs printers X1 & P1 Series. T-BOX (Toolbox) green (at this moment it only fits on the A-BOX) A-BOX (AMS) yellow B-BOX (Buildplates) D-BOX (Drawer)…
More details and discussions on my risers on my FB group 3D Bambu4All This is the small form factor version of my AMS riser. You can add cob/led lights: 10mm cob or normal ledstrips, best is to use two short strips which slide in on both…
