X3D-V3 AMS Riser LED Tracks
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is to allow 10mm COB LED lights to be mounted on the inside of the printer/riser.
- Ocena
- 0 / 5
- Polubienia
- 14
- Pobrania
- 66
- Wydruki
- 0
- Wyświetlenia
- 1071
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Bambu Lab Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
These tracks are designed to fit the inside parameter of the X3D-V3 AMS Riser and hold 10mm COB LEDs at 70 degrees from horizontal (20 degrees from vertical). I cut the lengths in quarters to allow them to print more easily without the need for a brim. The riser has 2 long sides (front and rear) and 2 short sides (left and right). You will need to print 8 of each track (shorter and longer) or the .3mf file which has all of them arranged on a single print bed. I then used Gorilla Super Gel to attach them to the riser as seen in the pictures.