X3D-V3 AMS Riser LED Tracks
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is to allow 10mm COB LED lights to be mounted on the inside of the printer/riser.
- Rating
- 0 / 5
- Likes
- 14
- Downloads
- 66
- Makes
- 0
- Views
- 1,071
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Bambu Lab Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
These tracks are designed to fit the inside parameter of the X3D-V3 AMS Riser and hold 10mm COB LEDs at 70 degrees from horizontal (20 degrees from vertical). I cut the lengths in quarters to allow them to print more easily without the need for a brim. The riser has 2 long sides (front and rear) and 2 short sides (left and right). You will need to print 8 of each track (shorter and longer) or the .3mf file which has all of them arranged on a single print bed. I then used Gorilla Super Gel to attach them to the riser as seen in the pictures.