Simple and nice Wire Manager Cable Organizer Kabelmanager Kabelklemme Kabelclips
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Strong and fast printable cable manager, only around 1g in the 25 degree version!
- Ocena
- 5 / 5
- Polubienia
- 77
- Pobrania
- 464
- Wydruki
- 3
- Wyświetlenia
- 1768
- Oceny
- 3
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I broke one of my wiremanager from my desktop, so i took the caliper and created the model.
Then i redesigned it for better printabiliy, with hight strength and a nice design.
You have different angles of the shape, smallest and best printable is the 25 degree version.
Just add a double sided glue tape and have fun 🙂
Insert the cable into the gap and rotate it…finished 🙂
The inner diameter and the gap between the two spring elements is 7mm. Rescale it if you need a different diameter. I have printed it with prusament PETG and managed to insert a 7mm wire without breaking. Do not put to much emphasis on the surface quality of the print picture, i overdid it with the printing speed…with my slow speed printer.
I recommend to use the orientation of the _print.stl files and with 100% infill to have the strongest possible result.
The _origin is the model of the broken one, so the base of the redesign.
Would be happy to see your makes!