MarsOrbiter Dual 5015
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Dual 5015 Shroud for Ender3/pro/v2 type machine (This is an archive, my current dual 5015 model is the ApolloLander)
- Ocena
- 0 / 5
- Polubienia
- 28
- Pobrania
- 157
- Wydruki
- 1
- Wyświetlenia
- 929
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Creality Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I regard this an as archive so there will be no further update, and no support for it
Here for anyone wanting to give this a spin.
Unlike my newer designs this requires very few screws and no heat inserts.
My current dual 5015 model is the ApolloLander, which has many advantages over the MarsOrbiter, but one thing the MarsOrbiter has is its simplicity.
STEP files included if you want to play with it
No print support needed. (I usually do 0.2mm layer height with a 0.4mm nozzle)
Can be printed in PLA, but overtime the duct could be affected if printing higher temps (reason why my newer designs with swappable ducts), PETG or better is likely a good idea.
Instruction are in a PDF
Supports Orbiter 1.5, Orbiter 2, and Sherpa mini
Files labeled Bltouch also support CRtouch
Phaetus Dragon ST/HF, Rapido (HF only), Dragonfly BMO, Drgaonfly BMS