Power Supply Holder 42V for Jetson E-Bike - Two Versions
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A "wall mount" bracket (two versions) to hold the 42V power supply for a Jetson e-bike.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 24
- Wydruki
- 0
- Wyświetlenia
- 135
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Mechanical Parts
- Licencja
- Creative Commons — Public Domain
I made these holders for the power supplies for my two Jetson e-bikes. They designed to be screwed onto a wooden frame using #6 (3.5mm) wood screws. The brackets are designed so that the power supply can be removed without removing the brackets.
For some reason, the two power supplies I have for the otherwise identical bikes are slightly different, so I made holders for each version.
For reference, the measurements of the power supply are :
- “A” version : 120mm L X 52mm W X 32.4mm deep
- “B” version : 132.5mm L X 57.8mm W X 31.7mm deep
As noted, the brackets mount by using #6 (3.5mm) wood screws. Use the power supply as a “template” to locate the brackets positions, and then screw the brackets into place.
Print Instructions
Use the provided 3mf files to print in PETG; otherwise :
- 0.3mm layer height
- 2 perimeters
- 20% grid infill
Orient on the build plate with the ends down.
CAD
The OnShape 3D CAD files for this are here :