Power Supply Holder 42V for Jetson E-Bike - Two Versions
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A "wall mount" bracket (two versions) to hold the 42V power supply for a Jetson e-bike.
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 24
- Makes
- 0
- Views
- 136
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Mechanical Parts
- License
- Creative Commons — Public Domain
I made these holders for the power supplies for my two Jetson e-bikes. They designed to be screwed onto a wooden frame using #6 (3.5mm) wood screws. The brackets are designed so that the power supply can be removed without removing the brackets.
For some reason, the two power supplies I have for the otherwise identical bikes are slightly different, so I made holders for each version.
For reference, the measurements of the power supply are :
- “A” version : 120mm L X 52mm W X 32.4mm deep
- “B” version : 132.5mm L X 57.8mm W X 31.7mm deep
As noted, the brackets mount by using #6 (3.5mm) wood screws. Use the power supply as a “template” to locate the brackets positions, and then screw the brackets into place.
Print Instructions
Use the provided 3mf files to print in PETG; otherwise :
- 0.3mm layer height
- 2 perimeters
- 20% grid infill
Orient on the build plate with the ends down.
CAD
The OnShape 3D CAD files for this are here :