1 / 10
Prusa MK4 Plotter 2.0
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Plotter with a step by step guide for the mk4
- Ocena
- 5 / 5
- Polubienia
- 136
- Pobrania
- 253
- Wydruki
- 2
- Wyświetlenia
- 4524
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Prusa Parts & Upgrades
- Licencja
- GNU General Public License v2.0
SzczegółyPliki (5)Wydruki i komentarze (Wydruki: 2) (Komentarze: 12)Remiksy (0)Kolekcje (225)Powiązane
UPDATE: the new 2.0 model needs to be printed with supports, but it is worth it due to the highly improved stability, drawing quality and 2 point mounting for pen, no wigling, no detail loss!!! (it can also work with a blowerfan duct)
Print settings: Any fillament, 60-100% infil with grid pattern, supports depend on model
- install a pen that writes smooth lower than the nozzle
- convert an image to svg and then to stl using links below (in the svg2stl use 0.8 height)
- put the stl on the build plate in prusaslicer to the top right corner
- now home your printer and than find the z offset using control
- put your z offset in the slicer in printer settings-general
- put “G4 P45000” in custom g-code before purge
- turn on z-hop in retraction
- now slice the stl image with the correct pen thickness and make sure its 1 layer then start the print without the plotter atachment and no fillament with the cut down paper secured on the build plate
- after the printer heats up and finnishes bed leveling completely attach the plotter as quick as possible (if you turned the heating off you only have 45 seconds)
- Enjoy!!! ;)