1 / 10
Prusa MK4 Plotter 2.0
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Plotter with a step by step guide for the mk4
- Rating
- 5 / 5
- Likes
- 136
- Downloads
- 253
- Makes
- 2
- Views
- 4,524
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Prusa Parts & Upgrades
- License
- GNU General Public License v2.0
UPDATE: the new 2.0 model needs to be printed with supports, but it is worth it due to the highly improved stability, drawing quality and 2 point mounting for pen, no wigling, no detail loss!!! (it can also work with a blowerfan duct)
Print settings: Any fillament, 60-100% infil with grid pattern, supports depend on model
- install a pen that writes smooth lower than the nozzle
- convert an image to svg and then to stl using links below (in the svg2stl use 0.8 height)
- put the stl on the build plate in prusaslicer to the top right corner
- now home your printer and than find the z offset using control
- put your z offset in the slicer in printer settings-general
- put “G4 P45000” in custom g-code before purge
- turn on z-hop in retraction
- now slice the stl image with the correct pen thickness and make sure its 1 layer then start the print without the plotter atachment and no fillament with the cut down paper secured on the build plate
- after the printer heats up and finnishes bed leveling completely attach the plotter as quick as possible (if you turned the heating off you only have 45 seconds)
- Enjoy!!! ;)