1 / 2
Garmin Fenix 7S mount and cable conduit
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This print mounts your Garmin watch onto the supplied cable. The cable flows down into the base and out to the USB slot.
- Ocena
- 0 / 5
- Polubienia
- 9
- Pobrania
- 46
- Wydruki
- 0
- Wyświetlenia
- 404
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Portable Devices
- Licencja
- Creative Commons — Public Domain
SzczegółyPliki (2)Wydruki i komentarze (Wydruki: 0) (Komentarze: 0)Remiksy (0)Kolekcje (10)Powiązane
Instructions
- Print both components
- Before gluing the two together make sure to slide the cable up the hole in the "base and stem".
- pass the end through the hole in the top “watchblock” mount and slot into its bed.
- Glue the two together
I'm thinking of printing a “retainer” at the base to stop the cable from sliding out when removing the watch.