Stihl AP battery carrier
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a carrier for two Stihl AP batteries. Easier to transport and it keeps the contacts away from dirt.
- Ocena
- 5 / 5
- Polubienia
- 30
- Pobrania
- 288
- Wydruki
- 3
- Wyświetlenia
- 1316
- Oceny
- 3
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor & Garden
- Licencja
- Creative Commons — Attribution — Noncommercial
This is a carrier for Stihl AP batteries, it will fit any battery of the AP series. I got fed up of these (very expensive) things sliding around in the back of my car. It both makes them easier to carry as well as protects the batteries from dirt.
The bottom is closed, so it can be placed on for example wet grass.
Print settings:
Make sure your bridging settings are correct. There was a little bit of sagging on the handle, but it actually makes it a little bit more comfortable.
Also make sure layer adhesion is good, or the handle will snap off eventually.
I optimized the design for a 0.8 mm nozzle. I printed it with 0.4 mm layer height, this is fine for a structural print.