Fireplace 1/6th scale for Barbie
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A fireplace made in multiple pieces. Made for my Barbie house.
- Ocena
- 0 / 5
- Polubienia
- 126
- Pobrania
- 211
- Wydruki
- 0
- Wyświetlenia
- 1494
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a fireplace I made for my Barbie house. It's printed in separate pieces and I had to put it together on a 3D base I made of MDF. You could probably use cardboard as well. I used clay and stamps to make the inside portion and some sticks for logs. I also wired it and made it light up, if you want to do that, you will have to drill a hole. I also caulked the edges and coated it in white 5 minute resin in order to get it smooth.
You may have to resize it, it's been a while since I've printed it.
side panels are about 165mm tall by 70mm
top is 190mm long by 90mm
front panel is 55mm by 110 mm long
fire place front side 25mm by 165mm tall (you can use the same model for the front lower panel which measures 22/23mm tall by 125 mm)
fireplace legs 165mm tall by 20mm
top of fireplace 90mm by 195mm long
lower fireplace top is 110mm by 112mm wide (It wouldn't fit on my printer so I had to print it separate half's) I used MDF offcuts to make the base and more clay and stamps to make the brick look.