M.2 NVME SSD heatsink clip
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I have a heatsink and don't like to use rubber bands to mount it.
- Ocena
- 0 / 5
- Polubienia
- 10
- Pobrania
- 68
- Wydruki
- 0
- Wyświetlenia
- 684
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution — Noncommercial
Warning! Clips may loosen over time due to heat creep depending on the temperatures and filament material used. Proceed with Caution!
As you can tell from the photo, I have it mounted on a USB to M.2 interface. It was getting too hot to touch to remove so I bought the cheapest heatsink on AliExpress (without thermal pad)
I could have used a rubber band, but I prefer a solution that could assemble the heatsink without removing the drive.
My earlier print in PLA started becoming loose after 1-2 hours at 50 deg C, now trying out ABS. So far it has been stable.
For my heatsink and SSD, the thickness to clamp is 3mm. I included a 3.5mm version if you wish to use a thermal pad. If you have other thicknesses, let me know.
*****
Want to buy me a coffee?
https://www.buymeacoffee.com/zer0s
Clicking on my affiliate links below will give me a small kickback if you purchase something. (at no extra cost to you)
AliExpress affiliate link:
Heatsink with thermal pad
https://s.click.aliexpress.com/e/_DlrQcgB
USB to M.2 converter
https://s.click.aliexpress.com/e/_De9FeB5
*****
Consolidated affiliate links of other 3D printing-related items:
https://wp.me/peMLu6-j
For Amazon affiliate links
https://wp.me/peMLu6-2C