1 / 3
Yaesu FT-891 Anderson PowerPole Adapter Pigtail Insert — zdjęcie 1
1 / 3

Yaesu FT-891 Anderson PowerPole Adapter Pigtail Insert

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

I created this as an insert for the PowerPole adapter because I wanted to secure wires in a pigtail.

Ocena
5 / 5
Polubienia
9
Pobrania
40
Wydruki
1
Wyświetlenia
554
Oceny
1

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Electronics
Licencja
Creative Commons — Attribution

This print is designed to work with https://www.printables.com/model/339212-yaesu-ft-891-anderson-powerpole-adapter/.

It provides an insert to the power pole adapter so that a pigtail can hang off the rear of the radio instead of putting the powerpole directly on the radio. 

To use, print the piece twice. These two pieces will sandwich the wire.  The gap closes to the edge goes toward the inside of the radio, and is intended to allow a ziptie for securing the wire. 

The small notch in the middle fits against the chassis. Installed correctly, it will sit flush with the outside of the power pole adapter. 

Tagi