1 / 3
Yaesu FT-891 Anderson PowerPole Adapter Pigtail Insert — image 1
1 / 3

Yaesu FT-891 Anderson PowerPole Adapter Pigtail Insert

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

I created this as an insert for the PowerPole adapter because I wanted to secure wires in a pigtail.

Rating
5 / 5
Likes
9
Downloads
40
Makes
1
Views
554
Reviews
1

Updated at source:

Model information

Category
Electronics
License
Creative Commons — Attribution

This print is designed to work with https://www.printables.com/model/339212-yaesu-ft-891-anderson-powerpole-adapter/.

It provides an insert to the power pole adapter so that a pigtail can hang off the rear of the radio instead of putting the powerpole directly on the radio. 

To use, print the piece twice. These two pieces will sandwich the wire.  The gap closes to the edge goes toward the inside of the radio, and is intended to allow a ziptie for securing the wire. 

The small notch in the middle fits against the chassis. Installed correctly, it will sit flush with the outside of the power pole adapter. 

Tags