Telescoping extension ladder replacement cap/cover
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A replacement for the plastic caps on most telescoping ladders to prevent water and debris from falling into the rails
- Ocena
- 0 / 5
- Polubienia
- 6
- Pobrania
- 52
- Wydruki
- 0
- Wyświetlenia
- 280
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution
Most telescoping ladders come with a plastic cap on the top to prevent water and debris from falling into the rails. Those unfortunately come off easily and then get lost easily. You can find replacements fairly inexpensively, or you can print them. This design is for ladders with a 28mm top hole.
I put bumps on the inside of these to get a tight fit, and these do fit fairly tightly. I printed mine in PLA but if your ladder spends a lot of time outside then you may want a more UV-resistant material.