Skylock Dry box Silicagel Container Another Type (Basic Parts)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Silicagel Container (Basic Parts) for Skylock (No Support + Easy to Make)
- Ocena
- 0 / 5
- Polubienia
- 10
- Pobrania
- 118
- Wydruki
- 0
- Wyświetlenia
- 577
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution
This is a silica gel container that fits the Skylark box.
It has been redesigned to be easier to manufacture than the existing model.
(based on esun spool size)
Hardware
Mainly M3 series bolts and locknuts are required.
- M3 Lock nut - 3
- M3x12 (Flat head) - 3
Printing
All parts are designed to be printed without a supporter according to the overhang setting. (However, please decide whether or not to support it according to your printer settings.)
Print some parts using brim or raft.
Ass'y Guide
Insert the M3 locknut (or normal nut) into the screw fixing part of the case,
Secure the cover with M3x12 (Flat head) bolts.
(Insert silica gel before closing the cover.)
Update
23.09.29 - v2 First Upload
v1 was scrapped during production. :(
24.02.07 - 0 top/bottom + Infill (Simple) Ver. Upload
Print with 3 perimeters, zero top & bottom layers, Honeycomb (40%) or 3D Honeycomb (20%) Infill Pattern
