LayersFactory
Zgłoś model
1 / 7
Portable Solder Fume Extractor — zdjęcie 1
1 / 7

Portable Solder Fume Extractor

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Matthew B

Matthew B

@MatthewB_2633

Remixed the design by @lewosh to omit the battery, omit the status LED, and redesign the fan/filter assembly

Ocena
5 / 5
Polubienia
27
Pobrania
143
Wydruki
2
Wyświetlenia
1020
Oceny
2

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Tools
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike
SzczegółyPliki (22)Wydruki i komentarze (Wydruki: 2) (Komentarze: 4)Remiksy (0)Kolekcje (42)Powiązane

This is a remix of lewosh's battery operated solder fume extractor. I made the following changes:

  • Base: Closed the opening for the battery status indicator and removed built-in support structures (I prefer to use PrusaSlicer organic supports)
  • Base Front: Closed the opening for the status LED reduced width by 0.5 mm for an easier fit into the base
  • Base Bottom: Closed the opening for the battery compartment and associated screw holes
  • Fan Housing, Fan Filter Compartment, & Fan Filter Housing: 
    • Moved cord hole to opposite side to reverse the fan orientation (pull air in through filter rather than push air out through filter)
    • Removed filter installation slot and changed so the filter (and filter compartment) just sits inside between the fan housing and fan filter compartment
    • Added screw holes in the corners to allow for assembly with four M3 x 50 mm screws & M3 nuts

 

Parts: