1 / 3
Hinge for garden chair "Las Vegas" — zdjęcie 1
1 / 3

Hinge for garden chair "Las Vegas"

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Designed a replacement for the hinge of the garden chair "Las Vegas" distributed by "Dänisches Bettenlager"

Ocena
0 / 5
Polubienia
7
Pobrania
42
Wydruki
0
Wyświetlenia
382
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial

My print of the four hinge halfs was done with PRUSAMENT PETG Jet Black.
Increased the perimeter to 4 and used a 20% Infill Gyroid.
printed each part separately in the center of the plain sheet.

the hinge parts fit perfectly in the aluminum frame parts of the chair. 

Now after some years, a hinge get broken (while using the Chair for router home working on an oak tree part). the part broke where the ALU ends.

Now i used a 0.15mm layer height, increased the perimeter to 6 and used a 50% Infill Gyroid. Maybe it would also a good idea to print with a carbon based filament, but i currently had no nozzle for that. 
 

 

Tagi