1 / 3
Hinge for garden chair "Las Vegas" — image 1
1 / 3

Hinge for garden chair "Las Vegas"

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Designed a replacement for the hinge of the garden chair "Las Vegas" distributed by "Dänisches Bettenlager"

Rating
0 / 5
Likes
7
Downloads
42
Makes
0
Views
382
Reviews
0

Updated at source:

Model information

License
Creative Commons — Attribution — Noncommercial

My print of the four hinge halfs was done with PRUSAMENT PETG Jet Black.
Increased the perimeter to 4 and used a 20% Infill Gyroid.
printed each part separately in the center of the plain sheet.

the hinge parts fit perfectly in the aluminum frame parts of the chair. 

Now after some years, a hinge get broken (while using the Chair for router home working on an oak tree part). the part broke where the ALU ends.

Now i used a 0.15mm layer height, increased the perimeter to 6 and used a 50% Infill Gyroid. Maybe it would also a good idea to print with a carbon based filament, but i currently had no nozzle for that. 
 

 

Tags