Fractal Pollen - Cored
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is an algorithmically generated, 3D fractal shape. A geometric curiosity.
- Ocena
- 0 / 5
- Polubienia
- 10
- Pobrania
- 59
- Wydruki
- 0
- Wyświetlenia
- 243
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Sculptures
- Licencja
- Creative Commons — Attribution — Share Alike
This is an algorithmically generated, 3D fractal shape. A geometric curiosity.
Print Settings
Supports:
Yes
Resolution:
.2mm
Notes:
I used auto-generated supports in Cura 3.2. Attached to Bed only, but it still had support at the top through the holes in the bottom.
How I Designed This
It's a little outdated now, but I made an Instructables on how to create 3D objects from 3D fractal shapes. http://www.instructables.com/id/Create-a-3D-printed-3D-fractal/
Instructions
This is a fun, curious shape, intended for 3D printing.
Another 3D fractal. This one reminds me of a flower made of apple cores. The STL is scaled at about 50mm per side on this one. The smallest wall thickness is approx 1.3mm, though that is more of a guestimate than any sort of true measurement.
Total 3D Printer noob here, but I'm tired of watching from the sidelines. :) I'm currently working on a tutorial that explains how to use a handful of free apps to create an endless variety of similar shapes. I don't have my own 3D printer, which makes it difficult to test my process.
Finally got a 3D printer and printer this out. Sliced in Cura 3.2, .2mm layer, generated supports with about a 70 degree overhang threshold. I just did the Support Attached to Bed option. This still got some good support up to the top through the bottom holes. Took a while to remove the supports, but not too bad.
Category: Other