GoPro/Headlamp Combo Helmet Mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Combined mount for a GoPro and TH30 V2 style headlamp.
- Ocena
- 0 / 5
- Polubienia
- 10
- Pobrania
- 36
- Wydruki
- 0
- Wyświetlenia
- 548
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This mount is intended for combined headlamp/GoPro usage, such as in caving situations. I printed it with SainSmart TPU (Shore Hardness 95A) at 100% infill. The headlamp is a bit difficult to squeeze through the loops, but it's held in place quite securely. For the GoPro, I epoxied an M5 nut into the recessed hole. I intend to lengthen and sweep the mounting point for the GoPro in a remix so it can rotate an additional few degrees. The mounting points for the GoPro are stiff enough that there is hardly any flex when moving your head around.