1 / 2
Sandpaper Storage 5inch French Cleat with dividers and ROS positioner - parametric — zdjęcie 1
1 / 2

Sandpaper Storage 5inch French Cleat with dividers and ROS positioner - parametric

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Sandpaper storage for 5in ROS sanders on French Cleat. Comes with dividers and a positioner. Fully parametric

Ocena
5 / 5
Polubienia
55
Pobrania
208
Wydruki
3
Wyświetlenia
1550
Oceny
3

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Organizers
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

French Cleat Sandpaper Storage for 5inch random orbit sanders with dividers and positioner for quickly mounting sandpaper onto the sander base. F3D file is included and fully parametric. 3/4inch french cleat attaches to the main body with M4x20 bolt and washer and connects to the nut that slides into the main body. 

8-hole positioner allows you to put in a sandpaper grit side down, line up the dust holes on the sander, and achieve a perfect fit every time to maximize dust collection.

Main body is sized so sandpaper won't fall out if tipped forward, but still easy to pull out the desired grit without taking everything out. Though I've found I mostly just take the whole thing off the cleat, grab the grit I need, then put the whole thing back. It's strong enough to hold the ROS as well. 

I printed in PETG but assuming anything should be fine. Enjoy!

Tagi