1 / 2
Sandpaper Storage 5inch French Cleat with dividers and ROS positioner - parametric — image 1
1 / 2

Sandpaper Storage 5inch French Cleat with dividers and ROS positioner - parametric

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Sandpaper storage for 5in ROS sanders on French Cleat. Comes with dividers and a positioner. Fully parametric

Rating
5 / 5
Likes
55
Downloads
210
Makes
3
Views
1,556
Reviews
3

Updated at source:

Model information

Category
Organizers
License
Creative Commons — Attribution — Noncommercial — Share Alike

French Cleat Sandpaper Storage for 5inch random orbit sanders with dividers and positioner for quickly mounting sandpaper onto the sander base. F3D file is included and fully parametric. 3/4inch french cleat attaches to the main body with M4x20 bolt and washer and connects to the nut that slides into the main body. 

8-hole positioner allows you to put in a sandpaper grit side down, line up the dust holes on the sander, and achieve a perfect fit every time to maximize dust collection.

Main body is sized so sandpaper won't fall out if tipped forward, but still easy to pull out the desired grit without taking everything out. Though I've found I mostly just take the whole thing off the cleat, grab the grit I need, then put the whole thing back. It's strong enough to hold the ROS as well. 

I printed in PETG but assuming anything should be fine. Enjoy!

Tags