cooler morpheus raijintek with 92mm fans
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
the support was made for the heatsink in question, mounted on a Tesla M40 nvidia, before with the 120mm fans it went…
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 21
- Wydruki
- 0
- Wyświetlenia
- 209
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution
the support was made for the heatsink in question, mounted on a Tesla M40 nvidia, before with the 120mm fans it went to a maximum of 45/50 ° with this support for smaller fans, it went to 40/42 ° maximum,
P.S. I used the noctua 92mm slim fans, exactly the: Noctua NF-A9x14 HS-PWM chromax.Black.Swap
P.P.S surely there is to put some shims if in your case the heatsink is not as crooked as mine, I tried to make them but I did not need them, if in your case the heatsink is straight, it is better to put thicknesses of about 1.5mm
Print Settings
Printer:
JGaurora A5
Rafts:
No
Supports:
Yes
Resolution:
0.3
Infill:
5%
Filament:
petgtech petgcrystalblue photo after print =================
Category: Computer