Replacement lift bracket for Danco 10071 Microban Dual Flush Toilet Handle
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a replacement part of the mechanism for the Danco Dual Flush handle that allows for two different flushes.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 16
- Wydruki
- 0
- Wyświetlenia
- 319
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Bathroom
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
The lift bracket for the Danco 10071 Microban Dual Flush Toilet Handle is made of a plastic that is quite brittle. The hole that the retaining pin goes through is under a decent amount of stress during use and, in my case, broke.
Instead of ditching the entire flusher, I decided to model a replacement part and 3D print it from tough PET recycled from a 2L Mountain Dew bottle.
This is a 1-for-1 replacement the part “H” lift bracket. You can, therefore, follow the instructions from the manufacturer themselves:
10071 I InstSheet_FINAL (danco.com)
I would suggest a tough, not brittle, material such as PLA+, PETG, or ABS.
The part is in the proper print orientation when loaded into PrusaSlicer. I would suggest supports to the build plate.