Replacement lift bracket for Danco 10071 Microban Dual Flush Toilet Handle
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a replacement part of the mechanism for the Danco Dual Flush handle that allows for two different flushes.
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 16
- Makes
- 0
- Views
- 321
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Bathroom
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
The lift bracket for the Danco 10071 Microban Dual Flush Toilet Handle is made of a plastic that is quite brittle. The hole that the retaining pin goes through is under a decent amount of stress during use and, in my case, broke.
Instead of ditching the entire flusher, I decided to model a replacement part and 3D print it from tough PET recycled from a 2L Mountain Dew bottle.
This is a 1-for-1 replacement the part “H” lift bracket. You can, therefore, follow the instructions from the manufacturer themselves:
10071 I InstSheet_FINAL (danco.com)
I would suggest a tough, not brittle, material such as PLA+, PETG, or ABS.
The part is in the proper print orientation when loaded into PrusaSlicer. I would suggest supports to the build plate.