RPi Camera Module 3 (Wide-Angle) Bed Mount for Kingroon KP3S
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Mount to attach Raspberry Pi Camera Module 3 (Wide-Angle) to the bed of a Kingroon KP3S 3D printer.
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 45
- Wydruki
- 0
- Wyświetlenia
- 585
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
Mount to attach Raspberry Pi Camera Module 3 (Wide-Angle) to the bed of a Kingroon KP3S 3D printer.
Affixes onto the metal bracket of the print bed with 3x 10mm M3 screws and 3x M3 nuts.
Download the FULL.stl for all necessary files in one STL. Otherwise, you can download each part separately.
Place the head of the screw on the bottom and the nuts on the top to avoid scraping the Y axis linear bearing.
Attach the ribbon cable as shown in the images, double-sided tape is also recommended. You can then thread the ribbon cable through the cable sleeve and into the printer to plug into a Raspberry Pi.
Requirements
- M3 screw (10mm) x3
- M3 nut x3
- Extended 15-pin ribbon cable for Raspberry Pi Camera Moudle 3 (I used a 100cm cable)
- Double-sided tape (optional)