M3 Stick Tops for Drone Controller - DJI Phantom 3 Controller and more
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
M3 Stick Tops for Drone Controllers - Made for my dad as he lost his DJI Phantom 3 Controller Stick tops.
- Ocena
- 5 / 5
- Polubienia
- 8
- Pobrania
- 67
- Wydruki
- 0
- Wyświetlenia
- 505
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution
So my Dad has a DJI Phantom 3 and he lost his Stick Tops.
I decided to make some.
Feel free to modify with the provided Fusion360 “.f3d” file.
If you make your own edit and post it then please add it as a remix to this.
I ended up printing “B-Wide-Rounded-Inner-Grip-r7.25x5mm” and that suited him.
All of the other provided STL files are untested.
The designs have a 3mm hole in the middle, unthreaded!
They may lock on tight to the sticks as they make their own thread and fit on M3 Sticks.
Printing
I printed the stick piece with Creality PLA Grey at 50% Infill and 0.16mm with Creality Slicer.
The files marked as “A” = Straight stick, will require supports.
The files marked as “B” = Angled small to big, I recommend and shouldn't require supports.