Desiccant Holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This desiccant holder is for the (un)original Prusa Drybox, which slot in between the filament path of the F-Beam.
- Ocena
- 4,8 / 5
- Polubienia
- 31
- Pobrania
- 149
- Wydruki
- 12
- Wyświetlenia
- 823
- Oceny
- 10
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Need your filament to stay even dryer.
This is the (un)original Prusa Dry box's front desiccant holder. This connect to the region on the F1-Beam is between the filament path.
The lid slides down on top of the holder and snaps into place.
No support is required. You can have as many as four but the middle location will not support one. This desiccant holder slides into place, however it may be secured with 3M tape on the underside of the descendent holder lip.
I'm working on a redesigned F1-Beam that will have a space for these holders. Other add-ons will be available soon.