Waste Chute / Basket Speed Print - Bambu Lab X1C
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Slightly smaller than original to fit on the bed more easily. I also have different wall stocks to help with print time.
- Ocena
- 4,667 / 5
- Polubienia
- 29
- Pobrania
- 857
- Wydruki
- 6
- Wyświetlenia
- 3080
- Oceny
- 6
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Bambu Lab Parts & Upgrades
- Licencja
- Creative Commons — Attribution
Waste / Poop chute for the BambuLab X1 Carbon. Used different wall thicknesses to help with prints times.
Below slicer times are based of of using a x1c with a .24mm layer thickness.
.8mm wall - 3hr 15min
1.2mm wall - 4hr 14min
1.5mm wall - 5hr 18min
2mm wall - 6hr 33min
3.175mm wall - 8hr
Times will vary.
I printed the 3.175mm and the .8mm. The 3.175 is like a manufactured piece, the .8mm though works just fine and almost prints like it's in vase mode, it's flexible but holds up fine and does the job just as well. Personally I'd probably print the 1.2mm version.