Flange roller Add-on for (Un)original Prusa Drybox
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I remixed the RackRoller from Repkord. It is design to fit with the (Un)original Prusa Drybox, using 18mm aluminium rods
- Ocena
- 5 / 5
- Polubienia
- 40
- Pobrania
- 260
- Wydruki
- 7
- Wyświetlenia
- 1053
- Oceny
- 7
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Prusa Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Share Alike
This is an Optional add-on to the (Un)original Prusa Drybox.
Simple rollers, using 608 bearings, that fit with the 18mm aluminium rods of the Drybox.
Note : All the files are also available for 20mm rods as an option. The filename indicates the version.
Drybox => https://www.printables.com/fr/model/551828-unoriginal-prusa-drybox
Bill of Materials for 1 spool :
- 4 x 3D Printed Roller Sides (2 symmetrical sides per roller)
- 4 x 608 Bearings (Common Skate Bearings)
- 8 x M3*80 Screws with cylindrical head (M3*100 works also) - same as used for the Drybox
- 8 x M3 Threaded Insert (the Ruthex one are fine)- the same as used for the Drybox
Assembly instructions :
- Print 4 roller sides
- Install 8 Threaded inserts as shown in the picture
- Place the bearings
- Close the roller using 8 M3 screws
- Place it on the rods of your Drybox and install a filament spool on it
- That's it !