1 / 1
Flange roller Add-on for (Un)original Prusa Drybox — image 1

Flange roller Add-on for (Un)original Prusa Drybox

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

I remixed the RackRoller from Repkord. It is design to fit with the (Un)original Prusa Drybox, using 18mm aluminium rods

Rating
5 / 5
Likes
40
Downloads
260
Makes
7
Views
1,053
Reviews
7

Updated at source:

Model information

License
Creative Commons — Attribution — Share Alike

This is an Optional add-on to the (Un)original Prusa Drybox.

Simple rollers, using 608 bearings, that fit with the 18mm aluminium rods of the Drybox.

Note : All the files are also available for 20mm rods as an option. The filename indicates the version.

 

Drybox => https://www.printables.com/fr/model/551828-unoriginal-prusa-drybox

 

Bill of Materials for 1 spool :

  - 4 x 3D Printed Roller Sides (2 symmetrical sides per roller)

  - 4 x 608 Bearings (Common Skate Bearings)

  - 8 x M3*80 Screws with cylindrical head (M3*100 works also) - same as used for the Drybox

  - 8 x M3 Threaded Insert (the Ruthex one are fine)- the same as used for the Drybox

 

Assembly instructions :

 

  1. Print 4 roller sides
  2. Install 8 Threaded inserts as shown in the picture
  3. Place the bearings
  4. Close the roller using 8 M3 screws
  5. Place it on the rods of your Drybox and install a filament spool on it
  6. That's it !