Creality K1 HEPA filter housing
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
An internal HEPA filter housing to accommodate Kenmore EF-2 86880 Exhaust Vacuum HEPA Filter and Activated Carbon filter
- Ocena
- 4 / 5
- Polubienia
- 81
- Pobrania
- 356
- Wydruki
- 2
- Wyświetlenia
- 4622
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Creality Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial
Many design available for download rely on the fan to blow thru the filter which is very inefficient.
All filters work best when the air is sucked through them, not pushed, That's why I moved the fan to the back.
Model should be printed in high HDT filament like ABS, ASA, PC.
Only modification required is to move the exhaust fan to the other side of the wall.
Link to installation instructions:
https://photos.app.goo.gl/Mw2LnperRDvaD8DZ7
Affiliate link to 5 pack Kenmore EF-2 86880 HEPA Filter used in this model.
Affiliate link to 6 pack Premium quality activated carbon filter mats
Affiliate link to the same 4 pack Premium quality activated carbon filter mats