1 / 6
Tab / Spring for battery lid of Canon EOS Rebel T3 — zdjęcie 1
1 / 6

Tab / Spring for battery lid of Canon EOS Rebel T3

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Replacement part for the tab / spring inside of the battery lid of the Canon EOS Rebel T3 camera.

Ocena
0 / 5
Polubienia
12
Pobrania
86
Wydruki
0
Wyświetlenia
481
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Photo & Video
Licencja
Creative Commons — Attribution — Share Alike

The plastic spring inside the battery lid of my Canon EOS Rebel T3 camera broke and I could not find a replacement part online (they would only sell the complete lid enclosure, which had a cost around 10 € + shipping), so I modeled just the part I needed and printed it for just a few cents :).

To get the best results, print it with the orientation shown in the last 2 pictures, taken straight from Cura.

Note: If your printer is not tuned for dimensional accuracy on the Z-axis, you might have better luck printing the “slim” model.

How to install replacement:

  1. Open the battery lid and remove the three screws seen in pic 2.
  2. Remove the cover.
  3. Take out the old spring / tab and put in the newly printed one.
  4. Put the cover back on, add the screws and you are all set!

Tagi