Tab / Spring for battery lid of Canon EOS Rebel T3
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Replacement part for the tab / spring inside of the battery lid of the Canon EOS Rebel T3 camera.
- Rating
- 0 / 5
- Likes
- 12
- Downloads
- 86
- Makes
- 0
- Views
- 481
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Photo & Video
- License
- Creative Commons — Attribution — Share Alike
The plastic spring inside the battery lid of my Canon EOS Rebel T3 camera broke and I could not find a replacement part online (they would only sell the complete lid enclosure, which had a cost around 10 € + shipping), so I modeled just the part I needed and printed it for just a few cents :).
To get the best results, print it with the orientation shown in the last 2 pictures, taken straight from Cura.
Note: If your printer is not tuned for dimensional accuracy on the Z-axis, you might have better luck printing the “slim” model.
How to install replacement:
- Open the battery lid and remove the three screws seen in pic 2.
- Remove the cover.
- Take out the old spring / tab and put in the newly printed one.
- Put the cover back on, add the screws and you are all set!