Lavalier Microphone Transmitter Pack Wall Mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Wall mount for a lavalier style microphone transmitter pack. Fits pack an standard back clip.
- Ocena
- 0 / 5
- Polubienia
- 8
- Pobrania
- 53
- Wydruki
- 0
- Wyświetlenia
- 377
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Audio
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This wall mount should hold just about any transmitter pack for lavalier style microphones (including head mounted microphone).
If you use a head mount style microphone (as in picture), there is a notch at the back of the mount, to hang the headband.
Cutout on front is to enable easy removal of transmitter pack, using a finger.
Mount using either countersunk screws, velcro, or double sided tape.
Print upright and no supports should be necessary.
(No real need to print with brim…I just do out of habit.)
Inner Dimensions: depth = 37 mm (1.45 in), width = 68.8 mm (2.7 in), height = 100 mm (3.93 in)
Wall thickness: 3 mm
PLA (or any material you want)
Pretty much any settings your machine can handle should work.