Simplex Pull Station Back Box with D1 Mini ESP32 Slot (Parameterizable)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A simple back-box for a Simplex pull station and ESP32 (in Wemos D1 Mini size)
- Ocena
- 0 / 5
- Polubienia
- 8
- Pobrania
- 56
- Wydruki
- 0
- Wyświetlenia
- 736
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
NOTE: DO NOT USE THIS FOR ACTUAL LIFE SAFETY DEVICES! This is obviously a home-made box and is not suitable for use in an actual fire alarm system. Don't even think about it.
This is a back-box I made for a Simplex pull station which has been modified to work with an ESP32 board connected to Home Assistant. Specifically, I designed this for an ESP32 with a D1 Mini form factor. In this design, the ESP32 board is not held in place securely, so I used some Kapton tape to hold it down.
I've also included a fully parameterized Fusion 360 file in case you want to remix or otherwise modify the design.
For the bolts, I used the following parts:
Heat set threaded nuts: https://www.amazon.com/gp/product/B07VFZWWXY
Heat set soldering iron tips (compatible with Hakko FX-888D and others): https://www.amazon.com/gp/product/B08B17VQLD
Metric bolt set: https://www.amazon.com/gp/product/B07K141VFD
Category: Household