Simplex Pull Station Back Box with D1 Mini ESP32 Slot (Parameterizable)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A simple back-box for a Simplex pull station and ESP32 (in Wemos D1 Mini size)
- Rating
- 0 / 5
- Likes
- 8
- Downloads
- 56
- Makes
- 0
- Views
- 736
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other House Equipment
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
NOTE: DO NOT USE THIS FOR ACTUAL LIFE SAFETY DEVICES! This is obviously a home-made box and is not suitable for use in an actual fire alarm system. Don't even think about it.
This is a back-box I made for a Simplex pull station which has been modified to work with an ESP32 board connected to Home Assistant. Specifically, I designed this for an ESP32 with a D1 Mini form factor. In this design, the ESP32 board is not held in place securely, so I used some Kapton tape to hold it down.
I've also included a fully parameterized Fusion 360 file in case you want to remix or otherwise modify the design.
For the bolts, I used the following parts:
Heat set threaded nuts: https://www.amazon.com/gp/product/B07VFZWWXY
Heat set soldering iron tips (compatible with Hakko FX-888D and others): https://www.amazon.com/gp/product/B08B17VQLD
Metric bolt set: https://www.amazon.com/gp/product/B07K141VFD
Category: Household