Counting matching models…
We were so keen to get installing our UniFi Protect G5 Dome Ultra cameras with their shiny backboxes, then realised that getting hold of G ¾"-threaded Conduit is a bit of a pain in the UK. We wanted to use standard 20mm PVC conduit, which…
This is a backbox spacer for the UK version of the Sonoff T1 [1]. Due to the current recessed backbox in the wall not being deep enough to accommodate the Sonoff unit a spacer was required. The spacer increases the depth of the backbox by…
This set of models are a collection of support files and other things needed to build the backbox for my vpinball cabinet. I've had a handful of questions about how I did this and requests to re-use these parts, so here it is, all in one…
This is a backbox for a UK double socket, to act as a desktop extension lead. The backbox is designed for a UK double socket. Parts required: - Desktop backbox print (this model) - 2 x M3 threaded inserts - Standard Double UK socket -…
Files to print a bracket, light diffuser, lamp baffle and clips to keep it all together. The bracket is designed to be compatible with two of the existing metal baffle screws on the non-prototype mystic backbox door. To fasten this well,…
I used this spacer with 4" Flipper Fidelity speakers to raise them just a bit to allow the speaker grill to fit better and be flush.
This frame will sit into a UK single backbox opening (e.g. where a metal backbox has been mounted behind a plastered wall) and enable a MDT keypad to be mounted. This replaces the provided mounting plate which can be difficult to mount on…
I made this based on my existing light baffle. Pictured is an old baffle. This 3D print should replace this. This is to block out the light bleed on the close lamps for the jackpot lamps on the right side of the backbox. You will need 2…
For those of you who have run out of more places to add lights to your virtual pinball cabinet, let me introduce something you don't need: Backbox corner matrixes! I designed these to address a few particular things I noticed about my…
Adapter to mount an MDT keypad into a GIRA 289600 drywall backbox.
I printed in Hatchbox True Black. Outline the outside of the hole with a black marker before install.
Pinball Backbox LED Diffuser for Pirahna Super-Flux LEDs Created by Outpost Kodelia ( https://www.thingiverse.com/OutpostKodelia ) License: Creative Commons - Attribution This is a universal light case for pinball backboxes that will…
Supports a Gira low profile keypad and frame with the correct mounting depth for the bus coupler. Fits very nicely if you used a Beadmaster, otherwise you'll need an accurately cut opening. You'll need basic supports under the overhangs…
With m3.5 brass inserts in 4 clips they clip into the sides of the backbox for some adjustment to the fitted switches or blanking panels. 20mm punch outs for conduit or screw glands and a few cutouts for screw fixing. This is a template…
reproduction backbox that fits 4041-60 / 4040-60 / 4050-80, etc. Screws will self-tap into plastic posts. Unlike the original - it has screw posts for all 4 screws, though you only really need 2 to mount the horn/plate.
