1 / 2
Gira Face Plate Support for UK Single Backbox
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Supports Gira low profile keypad and frame with the correct mounting depth for the bus coupler.
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 10
- Makes
- 0
- Views
- 69
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution — Noncommercial
Supports a Gira low profile keypad and frame with the correct mounting depth for the bus coupler.
Fits very nicely if you used a Beadmaster, otherwise you'll need an accurately cut opening. You'll need basic supports under the overhangs which should break of easily.
Don't overtighten or it may break, but once the keypad surround is clipped in this frame won't take much stress so should last fine. I've used around 20-30 in my house and they've worked well (I did some early ones in PLA, but I'd recommend PETG).