Gira Face Plate Support for UK Single Backbox
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Supports Gira low profile keypad and frame with the correct mounting depth for the bus coupler.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 10
- Wydruki
- 0
- Wyświetlenia
- 69
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Noncommercial
Supports a Gira low profile keypad and frame with the correct mounting depth for the bus coupler.
Fits very nicely if you used a Beadmaster, otherwise you'll need an accurately cut opening. You'll need basic supports under the overhangs which should break of easily.
Don't overtighten or it may break, but once the keypad surround is clipped in this frame won't take much stress so should last fine. I've used around 20-30 in my house and they've worked well (I did some early ones in PLA, but I'd recommend PETG).