TPU Replacement soft jaws for Cannon plug pliers
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Replacement TPU\Flex soft jaws for aviation cannon plug pliers
- Ocena
- 0 / 5
- Polubienia
- 11
- Pobrania
- 30
- Wydruki
- 0
- Wyświetlenia
- 279
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial
This print is a set of replacement soft jaws for aviation/electrical cannon plug pliers.
These pliers are also excellent for other general work when you don't want to mark up the finish of what you are trying to tighten/loosen.
Print in TPU, with at least 10 perimeters, and vary the infill to your desired flex.
They were a slightly snug slip fit into my pliers, if they are too loose in yours, secure with a dab of hot glue or slightly increase the overall model size.
I used Inland TPU on the Sainsmart TPU setting in prusa slicer and they printed OK.
Unfortunately i do not know the brand my pliers are.
Happy printing!