TPU Replacement soft jaws for Cannon plug pliers
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Replacement TPU\Flex soft jaws for aviation cannon plug pliers
- Rating
- 0 / 5
- Likes
- 11
- Downloads
- 31
- Makes
- 0
- Views
- 283
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Noncommercial
This print is a set of replacement soft jaws for aviation/electrical cannon plug pliers.
These pliers are also excellent for other general work when you don't want to mark up the finish of what you are trying to tighten/loosen.
Print in TPU, with at least 10 perimeters, and vary the infill to your desired flex.
They were a slightly snug slip fit into my pliers, if they are too loose in yours, secure with a dab of hot glue or slightly increase the overall model size.
I used Inland TPU on the Sainsmart TPU setting in prusa slicer and they printed OK.
Unfortunately i do not know the brand my pliers are.
Happy printing!